Load Cell Systems WDESK-L, Installation And User Manual

Page: 55 / 68

- 50 -
RESUME BATCHING AFTER A POWER CUT
If a blackout occurs during the batching (unloading phase included), when power comes back

appears: press ENTER to resume batching from the point of interruption, press ESC to
cancel the batching and return to the weight displaying.
If in constants

=

, when power comes back

appears and after 3
seconds the batching is automatically resumed.
Power failures do not cause any deletion of cycles still to be performed.
CONSUMPTION
If in constants consumption is enabled (

=

), the quantities batched for each product are
stored.
Selecting  the following information is displayed:
-
total quantity consumed for all products (divided by 100);
-
deletion data;
-
quantity consumed for each product.
The quantities will be printed out in full.
CONSUMPTION DELETION
To delete consumption confirm

, the

deletion confirmation is requested; confirm again
with ENTER or press ESC to cancel the command.
If the printer is enabled (see section SERIAL COMMUNICATION SETTING) an operation receipt is
printed.
      
 
…

  