- 33 -
SERIAL COMMUNICATION SETTING
-
/
: communication port.
-
: it disables any type of communication (default).
-
: MODBUS-RTU protocol; possible addresses: from 1 to 99 (see Communication
protocols manual).
-
: continuous weight transmission protocol to RIP5/20/60, RIP50SHA, RIPLED series
remote displays; the remote display shows the net weight or gross weight according to its
settings (set:
=
,
=
,
=
).
: continuous weight transmission protocol to RIP6100, RIP675, RIP6125C series remote
displays; the remote display shows the net weight or gross weight according to its settings (set:
=
,
=
,
=
).
-
: continuous weight transmission protocol to RIP6100, RIP675, RIP6125C series
remote displays (set:
=
,
=
,
=
).
When the remote display is set to gross weight:
-
if the instrument displays the gross weight, the remote display shows the gross weight.
-
if the instrument shows the net weight, the remote display shows the net weight
alternated with the message
.
-
: printer.
-
: weight reception mode (see section WEIGHT READING VIA SERIAL PORT).
-
: weight reception mode (see section WEIGHT READING VIA SERIAL PORT).
-
: transmission speed (2400, 4800, 9600, 19200, 38400, 115200; default: 9600).
-
: instrument address (from 1 to 99; default: 1).
-
: delay in milliseconds which elapses before the instrument replies (from 0
to 200 ms; default: 0).
-
:
-
: no parity (default).
-
: even parity.
-
: odd parity.
-
: stop bit (1 – 2; default: 1).
-
:
number of blank lines between one printout and the next
.
-
: printing of custom heading from PC (
–
; default:
).
-
:
connected printer type:
-
-
-
-
For more information about protocols and methods of communication, request the
proper manual to technical assistance.
+
Summary of Contents for WDESK-L
Page 27: ...22 BATCHING CONSTANTS it appears only if in constants TOTAL YES...
Page 66: ......
Page 67: ......
