- 48 -
9.
If another product to be batched has been set in the formula, the instrument starts batching the
new product and you return to point 3;
10.
If there are no more products to be batched in the formula, the system enters the cycle end
phase:
-
The CYCLE END contact is closed;
-
The display shows the weight preceded by the letter
;
-
If printing is enabled: batching data are printed.
11.
At the beginning of the product extraction, if the
time is set and the product is not extracted
by at least 20 divisions within this interval of time, the
alarm message will be displayed.
12.
The system ends the batching (opening of the CYCLE END contact) only after verifying that:
-
The weight is lower than the minimum weight (
);
-
The safe emptying time has elapsed (
);
13.
Only if
=
: the instrument waits for data recording on PC, before being available for a
new batching.
If several batching cycles have been set the instrument starts a new cycle.
BATCHING START FROM EXTERNAL CONTACT
It is possible to select the required formula via an external selector switch. After selecting the
formula, close the START external contact for at least 0.5 seconds and, verified the conditions
indicated in section BATCHING, the instrument will perform the selected formula batching.
If there is no the formula selection switch (E/EC options), the latest formula entered via the keypad
will be batched, or it’s possible to set the required formula in the following menu: press the MENU
key for 3 seconds,
will be displayed, set the required formula number using the arrow keys
and confirm with ENTER. At batching start, the set formula will be performed. If 00 is set, the latest
formula set via keypad will be recalled.
If at the end of the batching, the START contact is closed, the same batching
sequence is repeated.
BATCHING START FOR SINGLE PRODUCT WITH AUTOMATIC STOP
This function allows to batch a single product without having to set a special formula.
From weight displaying press START and select the
formula; select the product to batch (eg.:
) and set its amount; confirm with ENTER to perform the batching of the selected product.
The instrument updates the consumptions, production and stock values (if present and enabled) and
sends the data to the printer (if enabled).
Summary of Contents for WDESK-L
Page 27: ...22 BATCHING CONSTANTS it appears only if in constants TOTAL YES...
Page 66: ......
Page 67: ......
