- 49 -
BATCHING START FOR SINGLE PRODUCT WITH STOP BY KEYBOARD
This function allows to batch a single product, leaving the operator the task to stop the batching.
From weight displaying press START and select the
formula; select the product to batch
(eg.:
) and set its amount to 0; confirm with ENTER to close the relay of the selected
product and start the batching; press STOP to stop it.
The instrument updates the consumptions, production and stock values (if present and enabled) and
sends the data to the printer (if enabled).
UNLOADING START WITH AUTOMATIC STOP
This function allows to unload all the scale contents until it reaches the minimum weight.
From weight displaying press START, select the
formula and select the
product;
confirm with ENTER to close the CYCLE END relay and start the scale unloading phase; this ends
after reaching the minimum weight and after the safe emptying time has elapsed.
DISPLAYING DURING BATCHING
During the batching the display shows the net weight preceded by the letter
.
By pressing
the product number is displayed.
By pressing
the formula number is displayed, by pressing it again the number of running cycle is
displayed.
BATCHING STOP
-
Open the START contact and close the STOP contact to stop the batching. If the START contact
is closed, the
alarm is displayed.
-
To pause the batching at any time, press
STOP, the
prompt is displayed. Press ENTER
to resume the batching or press again STOP to cancel it completely.
Summary of Contents for WDESK-L
Page 27: ...22 BATCHING CONSTANTS it appears only if in constants TOTAL YES...
Page 66: ......
Page 67: ......
