LNS GT 326-E, Instruction Manual, Page: 92 / 218

Chapter 8 OPERATION
8 - 15
GT 326-E
POSITION
INSERTION TRAVEL DISTANCE
Specifies the stroke of the pusher for the insertion of
the bar into the pusher collet.
EXTRACTION TRAVEL DISTANCE
Specifies the stroke of the pusher for the extraction of
the bar from the pusher collet.
PUSHER TORQUE RATE
Torque values as described.
DURING FEEDING
Part setup will influence the torque of bar feeding
including during the FIRST FEED, feeding into lathe,
manual forward and feed on fixed headstock type lathe
with chuck opened.
WITH CLAMPING DEVICE CLOSED (For fixed
headstock machine)
Torque applied during machining operations.
Part setup will influence the torque when the chuck of
the lathe is closed. User can also use this parameter to
adjust the torque.
TO COMPENSATE THE PUSHER FRICTION (For
sliding headstock machine)
The torque applied during machining operations.
AGAINST THE CUT-OFF TOOL (For sliding
headstock machine)
This setup defines the torque applied when the bar
stock pushes against the tool.
LANGUAGE
Allows the user to choose the barfeed HMI language.
TORQUE
Language