LNS GT 326-E, Instruction Manual, Page: 87 / 218

8 - 10
Chapter 8 OPERATION
GT 326-E
8.4.2 Quick preview
Designation Description Default Value
PART SETUP
Diameter & length
Bar diameter Subject to actual use
Part length 1000mm
Guiding element Guiding element Subject to actual use
Number of clamping
device openings
Collect openings 1 Time
Part setup
Too short 0
Too long-collet closed 510mm
Too long- collet open 510mm
APPLICATION
Feeding type Turret parked in position
Application
M-code for part feed out Subject to actual use
Deceleration distance 20mm
POSITION
End of bar
2.5M 3.0M 12
’
4.0M
2850mm 3350mm 4050mm 4350mm
Top cut Top cut position 200mm
Front rest opening Front rest opening position 1500mm 2000mm 2600mm 3000mm
Auxiliary end of bar
Auxiliary end of bar
position
1500mm 2000mm 2000mm 2000mm
External stabilizer
(option) External stabilizer opening
position
0 0 0 0
Hydraulic pump OFF
Hydraulic pump OFF at
pusher position
1800mm 2300mm 2900mm 3300mm
Position
Insertion travel distance 35mm
Extraction travel distance 60mm
TORQUE
Pusher torque rate
During feeding
Depend on
“PART SETUP”
With clamping device
closed
(For fixed headstock
machine)
To compensate the pusher
friction
(For sliding
headstock machine)
Against the cut-off tool
(For
sliding headstock machine)
LANGUAGE
Language Subject to actual use
Unit of measure Subject to actual use
Functions
Dry run
Front rest setup