LNS Express 220 S2, Instruction Manual

Page: 68 / 119

CHAPTER 8: HANDLING 65
EXPRESS 220 S2/320 S2
Switch to manual mode Go to next page
Pusher forward (picture may be
reversed depending on the feed
side)
Validate
Pusher reverse (picture may be
reversed depending on the feed
side)
Cancel
Close guide zone Load a bar in the guiding elements
Open guide zone
Confirm manual extraction of a bar from
the guiding elements
Automatic Top-Cut positioning in
manual mode
(picture may be
reversed)
Teach data
Remove the material from the lathe's
spindle (the image can be reversed
to match the feeding side)
Value modification by correction
Confirm. In settings mode, to
validate a new parameter or a new
value, press and hold until the icon
disappears. (approximately 3
seconds)
Increase value during correction setting
Start sequence Reduce value during correction setting