INSTALLATION
4
1. Installation
This section describes how to install the ThunderBox 600 Thunderbolt
2 & USB 3.0 to 6Gb/s SAS RAID storage with host computer and disks.
1.1 Before You First Installing
Thanks for purchasing the ThunderBox 600 as your RAID data stor-
age. The following manual gives simple step-by-step instructions
for installing and configuring the ThunderBox 600 RAID storage.
Unpack
Unpack and install the hardware in a static-free environment.
ThunderBox 600 RAID storage is packed inside an anti-static bag
between two sponge sheets. Remove it and inspect it for damage.
If the ThunderBox 600 RAID storage appears damaged, or if any
items of the contents listed below are missing or damaged, please
contact your dealer or distributor immediately.
Checklist
• 1 x ThunderBox 600 6-bays RAID storage unit
• 1 x Installation CD – containing driver, relative software, an
electronic version of this manual and other related manual
• 1 x RJ-45 LAN cable
• 1 x USB 3.0 cable (USB 2.0 compatible)
• 1 x Thunderbolt cable
• 1 x Power cord
• 24 x Drive mounting screws (4 per drive tray)
• 1 x Quick start guide
System Requirements
• Computer with Thunderbolt connector
• Mac OS X 10.8.5 or higher
• Windows 7&8
“For Windows PC: the Thunderbolt certified device driver must be
installed before plugging in the device for it to function properly”
