INSTALLATION
14
Step 3. Connecting Monitor Port (Optional)
You can connect LAN port to the manager clinet system, if you
want to configure and manage the RAID storage from the clinet
system through out-of-band manager.
• LAN Port Connection
User can remote manage the RAID enclosure without adding
any user specific software (platform independent) via standard
web browsers directly connected to the 10/100Mbit RJ45 LAN
port. Connect LAN port of the ThunderBox 600 using the
included Ethernet cable and then to a LAN port or LAN switch.
Step 4. Connecting RAID Storage Power
To power the RAID storage:
1. Using the included power cord, connect this power cord to a
grounded electronical outlet and to the ThunderBox 600 RAID
storage.
2. ThunderBox 600 RAID storage will automatically turn on when
host computer power on status is received from the thunder
bolt cable. It takes about 30 seconds to fully start up the RAID
storage.
Figure 1-8, Connecting USB 3.0 Port to Host Computer
