Safety instructions
7
Cautions
Do not sit on the LM DTS
TM
Reader. Maximum load of 5 pounds or 2 kilograms
allowed.
If the LM DTS
TM
Reader has been in the cold, allow it to warm up at room
temperature for at least 6 hours before switching on, in order to allow
condensation formed to evaporate.
Always check that the LM DTS
TM
Reader’s cables and connectors are in
operational use. If the LM DTS
TM
Reader’s cables or connectors are damaged,
do not use the LM DTS
TM
Reader.
The LM DTS
TM
Reader is intended for indoor use only.
Portable and mobile RF (Radio Frequency) communications equipment can have
an unwanted effect on the product.
Mandatory actions
System is not used for medical treatment decisions.
Basic recommendation is that the reader is on all the time. However, the user
may turn it off before transportation.
Device is not intended for use in conjunction with flammable agents or
anesthetics.
Turning on the LM DTS
TM
Reader takes up to 30 s and display is black during
startup.
A warning that the LM DTS
TM
Reader should not be used adjacent to or
stacked with other equipment and that if adjacent or stacked use is necessary,
the LM DTS
TM
Reader should be observed to verify normal operation in the
configuration in which it will be used.
Note
The manufacturer of the LM DTS
TM
Reader may provide a description or list of equipment with which the LM
DTS
TM
Reader has been tested in a stacked or adjacent configuration and with which stacked or adjacent use is
permitted.
