Installation of the reader
15
4.2. Power and ethernet
• Verify that the voltage rating shown on the base of the reader matches the voltage of the AC power
outlet.
• Verify that the AC power outlet is provided with the protective ground.
• Connect the DTS Reader to AC power (110 V / 230 V) via the power cable or the Power over Ethernet
(PoE) cable (PoE only available in LM DTS
TM
Tray reader, not supported in Prod Code 70010).
• After connecting the power check that the touch screen is turned on (Might take up to 30 s).
• The device starts and establishes a connection with the network automatically.
AC power ports
Ethernet cable
port
Tray reader
Unit reader
