05
AFTER POWER-UP
As soon as the bread maker is plugged into the power supply, LCD will
be illuminated while a beep will be heard. If has not any operation, LCD
will be extinguished after 20s; The default setting of 900g and MEDIUM.
“BASIC” are displayed on LCD.
START / STOP
For starting and stopping the selected baking program
To start a program, touch the “START/STOP” button once. the program
starts. Enter working status (if delay function is used, the time starts to
count down, the appliance will start to work when the remaining time
equal to finish time set for this menu.). when unit starts, only the selected
one-level, second-level menu burn steady
，
others menus won’t be
displayed, time begin to count down. After enter the operation, unit will
pause by pressing “START/STOP” button once, and renew by pressing it
again, if press “START/STOP” button more than 2s, the program will be
reset, a beep will be heard, program back to standby status, default to
select the one-level menu when starting, other menus burn steady
。
To stop the program, touch the “START/STOP” button for approx. 3
seconds until a beep confirms that the program has been switched off.
PAUSE
After procedure starts up, touch “START/STOP” button once to interrupt
at any time, the operation will be paused but the setting will be memo-
rized, the working time will be flashed on the LCD. Touch “START/STOP”
button again or within 10 minutes without touching any button, the
program will continue.
MENU
Use setting knob to set different programs. The functions of 25 menus
will be explained below.
1.BASIC: kneading, rising and baking normal bread. You may also add
ingredients to add flavor.
