10
11
TOOLS INCLUDED:
F
5 mm T-Wrench
F
8 mm T-Wrench
F
LSPRO1: Screwdriver
PARTS INCLUDED:
F
1 Console Assembly
F
2 Handlebars
F
2 Console Masts
F
1 Hardware Kit
F
1 Safety Key
F
1 USB Cover
F
1 Audio Adapter Cable
F
1 Power Cord
LSPRO1 only:
F
2 Main Frame Boots
F
2 End Caps
F
1 LIVE
STRONG
.COM USB Stick
LSPRO2 only:
F
1 Passport Player
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.
NEED HELP?
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill
from packaging until specified to do so in the assembly instructions. You may
remove the plastic wrap from console masts.
WARNING
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a
protective covering on your floor. Take CAUTION when handling and transporting this
unit. Once the banding straps have been removed, do not transport this unit unless it is
fully assembled. Unpack and assemble the unit where it will be used. Never grab hold of
any portion of the incline frame and attempt to lift or move the treadmill. Lift the treadmill
from the roller end caps area while a second person removes the parts packed under
the treadmill.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
such as lithium bike grease is recommended.
PRE
ASSEMBLY
LS
PRO
1
page 12
LS
PRO
2
page 16
ASSEMBLY
LSPRO1and2_OM_Rev1_9.indd 10-11
8/22/11 4:01 PM
