LivaNova 60-03-00, Service Manual

Page: 67 / 82

SCPC System • Replacing components
CP_SEM_60-03-00.002 67
6.9 Replacing circuit board components
6.9.1 Battery monitoring (ZAU 2002) circuit board
Replacing the EPROM
fig. 38: Replacing the EPROM
The EPROM C 26 contains the operating software (firmware) for the battery monitoring. Replacement is
necessary in the following cases:
◗
To perform an update
◗
In the event of error messages that indicate a defect in the EPROM (e.g. error 02).
Observe the following instructions when replacing the EPROM:
◗
Always use suitable removal and insertion tools so as not to bend the contacts.
◗
Avoid static charging (and hence damaging the electronic components) by suitable earthing
measures.
◗
When inserting the new EPROM, ensure the correct alignment (notch pointing towards centre of
board).
C 26