Lissmac MAB 2001 Operating Instructions Manual Download Page 21

Page: 21 / 67

21/67

COMMISSIONING

3.1.

Connections

Power connection

Reliable power source with the operating voltage indicated on the rating plate
(400V or 230V) and the corresponding protection must be present.

Operating hydraulic oil

The motors are filled with hydraulic oil by the manufacturer.
Only hydraulic oil approved by the manufacturer may be used.

3.2.

Controls

Foot switch with EMERGENCY OFF function

The foot switch is used to lift and lower the masonry work
platform. The foot switch is placed on the masonry work
platform and controlled via the operator's foot. The foot
switch has an EMERGENCY OFF function at the top.

Manual control with EMERGENCY OFF function

The manual control is used to lift and lower the masonry
work platform.
The manual control has an EMERGENCY OFF function at the
top.

Summary of Contents for MAB 2001




































































Search results

Summary of Contents for MAB 2001

Reviews:

Related manuals for MAB 2001

Brands by name

Popular brands

Lissmac MAB 2001, Operating Instructions Manual

Search results

Summary of Contents for MAB 2001

Reviews:

Related manuals for MAB 2001

Brands by name

Popular brands