Lissmac MAB 2001, Operating Instructions Manual

Page: 16 / 67

16/67
1.6. Transport
Transport is only permitted if the masonry work platform is lowered and all railing elements have been
disassembled.
When relocating the masonry work platform, a suspension of four with sufficient carrying capacity must be
used. No persons or equipment must be present on the masonry work platform.
Determine a qualified instructor for lifting.
Only lift the masonry work platform professionally with lifting gear by the crane eyelets according to the
information in the operating instructions.
Only use a suitable transport vehicle with sufficient carrying capacity.
Reliably secure load. Use suitable attachment points.
Even if it is moved only a little, the machine must be disconnected from the mains! Before recommissioning,
connect the machine properly to the mains again.
Only proceed according to the operating instructions when recommissioning.
Observe national road traffic rules.
Collision with stationary buildings, vehicles or other objects must be avoided.
1.7. Packaging and Storage
Check the machine for damage at receipt. In case of damage, the machine must not be taken into operation.
Damaged cables and plug connections also pose a safety risk and must not be used. Inform the manufacturer
company in this case.
If the machine is not taken into operation at once after unpacking, it must be protected from moisture and
dirt.
1.8. Environmental Protection
Packaging material, cleaning agents, consumed or residual operating materials, as well as unpacked wear
parts such as drive belts or motor oils must be recycled according to the environmental protection provisions
applicable at the site of use.
1.9. Disposal
If the end of the machine's service life has been reached, specifically if any functional impairment occurs, the
useless machine must be made unusable.
Dispose of the machine according to the environmental protection provisions applicable in your country.
Electrical wastes must not be disposed of together with household waste.