13/45
1.4.5.
Special work while using the machine
1.4.5.1
Follow all setup, maintenance, and inspection activities and schedules prescribed by the operating
manual, including all information about the replacement of parts / assemblies! These activities
may only be carried out by technical personnel.
1.4.5.2
Inform operating personnel before beginning special and maintenance work! Name a supervisor!
1.4.5.3
If the floor saw is turned off during maintenance and repair work, it must be secured against
unexpected application of power.
1.4.5.4
Before cleaning all openings in which no cleaning agent should penetrate due to safety and/or
functional reasons must be covered and glued. Electric motors, switches and plugs are especially
at risk. After cleaning, remove the covers/tape completely!
1.4.5.6
During service and repair work, always tighten loose bolt joints!
1.4.7.7
If dismantling is required for fitting, servicing and repair, the safety fittings must be remounted
and checked immediately following the service and repair work!
1.4.7.8
No rotating tools which have a maximum rotation speed smaller than the nominal speed of the
machine can be used.
1.4.6.
Moving the floor saw
1.4.6.1
The floor saw may only be moved when the saw blade is at a standstill.
1.4.6.2
Before leaving the operating position on the floor saw, the drive motor must be shut down and the
saw blade must no longer rotate.
There is a danger of injury by a rotating saw blade.
1.4.6.3
The operator may not leave the floor saw if the parking brake has not been activated. The floor
saw must be secured against rolling away.
1.5.
Safety instructions for special types of dangers
1.5.1.
Danger for the operator by the machine
1.5.1.1
Before leaving the operating position on the floor saw, the drive motor must be shut down and the
saw blade must no longer rotate.
There is a danger of injury on a rotating saw blade.
1.5.1.2
Working on the floor saw and moving with rotating saw blade is prohibited.
1.5.1.3
The drive motor of the floor saw must only be put in operation for intended use cutting.
