18/45
2.5.
Hand arm vibration
The given value was determined with the maximum saw blade diameter.
The impact can be reversely proportional to the weight of the operator.
Total vibration value:
COMPACTCUT 400 E a
HV
less than 2.5 m/s
2
The following standards were complied with during measurement:
EN ISO 5349, VD 2057 Sheet 2, Directive 2002/42/EC.
The given values were measured during concrete cutting at a cut depth of 5 cm.
In practice, these values are influenced by the following conditions:
•
Quality of the saw blade
•
Number of saw blades
•
Weight of the operator
•
Feed speed
•
Condition of the machine
•
Concrete properties
2.6.
Water pressure
Note
The water pressure in the lines to the floor saw must not exceed 5 bar. Otherwise use a pressure
reducer and reduce the water pressure to max. 5 bar.
