27/45
5.6.
Wall gliding saw hood (optional)
Danger!
Removing or opening of the saw blade protective hood or reaching into the rotating saw blade
during cutting is prohibited. These works may only be carried out with the saw blade at a
standstill and the drive motor turned off.
Danger!
Cutting with an open saw blade protective hood is prohibited! Ensure that the saw blade
conforms to standards - is covered.
The saw blade protective hood on the floor saw can be exchanged for a wall sliding saw hood
(optional). This wall gliding saw hood (Pos. 1) permits cutting with the floor saw flush to a wall.
Turn off drive motor and wait until the saw blade is not running anymore
Remove the saw blade protective hood from the floor saw
Mount the wall gliding saw hood and rods on the floor saw
Note
A special flange (Pos. 2) is required for cutting flush to a wall
5.7.
Turning of floor saw
Danger!
Before leaving the operating position on the floor saw, the drive motor must be shut down and the
saw blade must no longer rotate.
There is a danger of injury by a rotating saw blade.
Remove the saw blade with the handle from the cut groove
Move the rotary switch from the "Triangle" position to "Off"
Turn the main switch off.
Disconnect the power supply
Move the saw blade protective hood upwards until the parking brake actuates
1
2
