9
T
he functions of your locomoitve's switches are outlined below. Refer to Figure 4 for the location
of the switches.
The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and sets.
Smoke Unit Switch (NO SMK/SMK)
Used to turn the smoke unit function on and off. Be sure that track power is off when you throw
the switch
Program-Run Switch (PGM/RUN)
Used to assign an ID# and to reprogram the locomotive for LEGACY and Command operation
when the switch is in the PGM position. Also used to “lock” your powered locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the PGM position.
Locomotive switch locations
Locomotive basics
REAR
Volume control
knob
Program-Run
switch
Smoke unit
switch
Figure 4. Locomotive switch locations
