20
TrainMaster Command Control operations
CAB-1 Remote Controller numeric keypad commands
W
hen you press the AUX1 button on your CAB-1 Remote Controller, you turn the numeric keypad
into ten command buttons. After you press the
AUX1
button, you will be able to press any
numbered button until you address a different product.
The corresponding RailSounds sound sys-
tem effects are in italic type.
Stops and resets the locomotive. Resets the locomotive’s direction to forward. Your locomo-
tive keeps track of its fuel level. Higher engine speeds and/or heavy labor will use fuel at
a faster rate. Press and hold
AUX1, 0
for at least 3 seconds. You will hear the sounds of
fuel flowing into the tank as long as you hold the button. When you release the button, the
sounds will stop and the engineer will confirm that the tank is full.
Refueling sequence.
Raises the overall master volume of the LEGACY RailSounds sound system. To independent-
ly adjust the level of the background sounds only (e.g., the diesel roar and brake sounds),
tap
AUX1
and then this key.
Sound volume increases.
When adjusting the overall volume, you'll hear a single bell hit that gets louder or softer
with each volume adjustment. When the volume is at maximum, additional button presses
have no effect and won't play the bell. When adjusting the background sounds (
AUX1
, then
a volume key) you'll hear the prime mover volume change without a single bell hit.
Engineer begins radio dialog, dispatcher replies (see page 18).
CrewTalk communication.
Enters manual RPM mode and increases the RailSounds sound system RPM level. If the
LEGACY RailSounds sound system is shut down (see
5
key below),
3
activates a full LEGACY
RailSounds sound system start-up while the locomotive is stopped after pressing 5 with
track power on.
Lowers the overall master volume of the LEGACY RailSounds sound system. To indepen-
dently adjust the level of the background sounds only (e.g., diesel roar and brakes), tap
AUX1
and then this key. Volume settings are retained when track power is turned off.
Sound volume decreases.
Activates the LEGACY RailSounds sound system shutdown sequence when stopped. Activates
the emergency stop feature while in motion. Note that, in the shutdown sequence, the
smoke unit will turn off if it was already on.
Enters manual RPM mode and lowers the LEGACY RailSounds diesel motor RPM level.
TrainSounds random radio chatter.
