14
Warning sounds are an important part of Lionel Railroading. Your Lionel
Legacy Control System equipped engines have a real-time variable "quilling"
horn.
Blow the Horn by pulling down on the Warning Sound Controller. Notice the
difference in intensity of the horn sound.
Strike the bell once by pushing the Warning Sound Controller up and releas-
ing quickly. To activate continuous bell sounds, push the Warning Sound
Controller up and hold it for 1.5 seconds. To discontinue the bell sounds, push
and hold the Warning Sound Controller up until the bell stops.
LEGACY Control System operations
The Warning Sound Controller
The Speed Bar is used to select a new touch-screen
Icon Control set. This set of touch-screen keys is used
to select prototypical preset speeds. The speed of the
engine changes with each press and release of a differ-
ent Preset Speed key.
•
Tap a key, and your locomotive will immediately
begin moving to that speed.
•
If you hold the key until the dialog is finished,
the engineer will indicate that he is "increasing
to...", "slowing to...", or "we are at..." the com-
mand speed.
You can also use the Velocity Throttle and other
action controls in this mode and continue to use
Preset speeds at the same time.
Press
AUX1
to leave the Preset speed mode and
return to the Standard Control Panel. Press the speed
bar to toggle between the Speed Control Panel and the
Standard Control Panel.
The Speed Bar
Switcher engines do not have preset speed dialog.
Note!
