18
LEGACY Control System operations
CrewTalk dialog in the LEGACY environment
I
n addition to the automatic triggering of dialog via Sequence Control mode operation (see the pre-
vious section), you may control the dialog manually.
CrewTalk dialog features a variety of brief radio conversations between the engineer and dispatch-
er. CrewTalk dialog is an engineer-initiated radio conversation with the dispatcher. Be sure to listen for
the different combinations of words and phrases that comprise these exchanges.
TrainSounds dialog adds a fun variety to your train’s available sounds. In diesels, you’ll head ran-
domized realistic radio chatter. In steam, you’ll hear maintenance crews or cab chatter depending on
the
state
of
engine.
Refer to Table 1 below for the dialog commands. The dialog in the table provides examples of the
conversations you can trigger. The actual dialog will vary.
Table 1. LEGACY Remote Controller dialog commands
Locomotive
Commands
Example dialog
Stopped
AUX1, 2
Crew: Fuel level
2
Crew: Ask to depart
Tower: Deny departure
2
Crew: Ask to depart
Tower: Approve departure
5
or
Crew: Shutdown Announcement
AUX1, 5
Reset
or
AUX1, 0
Refueling sequence
(hold for several
Crew: My fuel is full
seconds)
7
TrainSounds Dialog: Randomized radio chatter
Moving
AUX1, 2
Crew: Report speed
2
Crew: Are we clear ahead?
Tower: Acknowledge
2
Crew: Are we clear inbound?
Tower: Acknowledge
5
or
Tower: Emergency stop
AUX1, 5
Crew: Acknowledge
7
TrainSounds dialog: Randomized radio chatter
