19
TrainMaster Command Control operations
CAB-1 Remote Controller commands
T
he CAB-1 Remote Controller commands are detailed below. The corresponding RailSounds sound
system effects are in bold italic type.
SET
L
M
H
Odyssey II Momentum
L
32 speed steps with low
momentum
M
100 speed steps with low
momentum
H
100 speed steps with medium
momentum
Releases the ElectroCoupler on the front of the loco-
motive.
Coupler release sound.
Releases the ElectroCoupler on the rear of the locomo-
tive.
Coupler release sound.
Activates the numeric keypad.
Short air release sound.
Controls switch direction. Toggles all lights on/off,
except lights that are wired to track power.
Accelerates the locomotive with a clockwise rotation.
Decelerates the locomotive with a counter-clockwise
rotation.
Speed-dependent RPM sounds.
Activates the locomotive’s horn. Release the button to
discontinue the sound.
Horn sound.
Toggles the bell sound on and off.
Bell sound.
Changes the locomotive’s direction. The locomotive
decelerates to a stop and continues in the opposite
direction when you increase the throttle.
Air release
sound.
Increases the locomotive’s speed while the button is
pressed. Release the button to return to the initial
speed.
Labored prime mover.
Decreases the locomotive’s speed while the button is
pressed.
Squealing brake sounds.
Shuts down all PowerMasters on your railroad. Stops
all TrainMaster Command Control-equipped loco-
motives in operation. Use HALT only in emergency
situations.
