manualshive.com logo in svg

Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband, User Manual, Page: 69 / 145

Share
Download
Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband User Manual Download Page 69

59

Chapter 6: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Setup Tab - 3G/UMTS Network

Wireless-G Router for 3G/UMTS Broadband

The Setup Tab - 3G/UMTS Network

On this screen, you can configure mobile network settings and view mobile status information for the Router. 
Some of these settings will be automatically configured by the Router and, in most cases, do not need to changed 
unless you are instructed to do so.

Mobile Network Settings

Auto Connect

. If this feature is enabled, the Router will automatically connect to the default 3G/UMTS or GPRS 

network when it powers on. The default is 

Disable

.

Disconnect if idle for

. If you want to disconnect the Router from the 3G/UMTS or GPRS network if no data has 

been sent or received from the Vodafone network for a specific period of time, then enter the number of minutes 
you want to specify in the field provided.

APN Configuration

Home Network

. From this pull-down menu, select the Vodafone network that provides your service.

APN Name

. The APN (Access Point Name) Name is automatically entered by the Router. Do not change this 

setting unless told to do so by either Vodafone or LInksys technical support, or the IT manager of your company. If 
you have access to a private APN, you can enter its name here.

User Name

. The User Name is automatically entered by the Router. Do not change this setting unless told to do so 

by either Vodafone or LInksys technical support, or the IT manager of your company. If you have access to a 
private APN, you can enter the new User Name here.

Password

. The Password is automatically entered by the Router. Do not change this setting unless told to do so 

by either Vodafone or LInksys technical support, or the IT manager of your company. If you have access to a 
private APN, you can enter the new Password here.

PIN Code

. If required, enter the PIN code of your SIM card. The code will be stored here for future reference by 

the Router, and you will not have to re-enter this unless you change SIM cards.

Mobile Network Status

This section indicates whether the Router is using a mobile network bearer or a 3G/UMTS or GPRS network.

Mobile Network Bearer

. Displayed here is the name of the mobile network bearer the Router is using.

Figure 8-13: Setup Tab - 3G/UMTS

Summary of Contents for WRT54G3G - Wireless-G Router For Verizon Wireless Broadband


















































































































































Reviews:

No comments