manualshive.com logo in svg

Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband, User Manual, Page: 95 / 145

Share
Download
Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband User Manual Download Page 95

85

Chapter 6: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Status Tab - Wireless

Wireless-G Router for 3G/UMTS Broadband

The Status Tab - Wireless

The 

Wireless

 screen on the Status Tab displays the status of your wireless network.

Wireless

MAC Address

. This is the Router’s MAC Address, as seen on your local, wireless network.

Mode

. As selected from the Wireless tab, this will display the wireless mode (Mixed, G-Only, or Disabled) used by 

the network.

SSID

. As entered on the Wireless tab, this will display the wireless network name or SSID.

DHCP Server

. If you are using the Router as a DHCP server, that will be displayed here.

Channel

. As entered on the Wireless tab, this will display the channel on which your wireless network is 

broadcasting.

Encryption Function

. As selected on the Wireless Security Tab, this will display what type of encryption the 

Router uses for security.

Click the 

Refresh

 button to view the latest status information.

Figure 8-52: Status Tab - Wireless

Summary of Contents for WRT54G3G - Wireless-G Router For Verizon Wireless Broadband


















































































































































Reviews:

No comments