64
Chapter 6: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Wireless Tab - Basic Wireless Settings
Wireless-G Router for 3G/UMTS Broadband
Interface
. This interface tells you whether the Destination IP Address is on the
LAN & Wireless
(Ethernet and
wireless networks), the
WAN
(Internet), or
Loopback
(a dummy network in which one PC acts like a network—
necessary for certain software programs).
Click the
Show Routing Table
button to view the Static Routes you’ve already set up.
Change these settings as described here, and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
The Wireless Tab - Basic Wireless Settings
The basic settings for wireless networking are set on this screen.
Wireless Network
Wireless Network Mode
. From this drop-down menu, you can select the wireless standards running on your
network. If you have both 802.11g and 802.11b devices in your network, keep the default setting,
Mixed
. If you
have only 802.11g devices, select
G-Only
. If you have only 802.11b devices, select
B-Only
. If you do not have any
802.11g and 802.11b devices in your network, select
Disable
.
Wireless Network Name (SSID)
. The SSID is the network name shared among all devices in a wireless network.
The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32
characters (use any of the characters on the keyboard). Make sure this setting is the same for all devices in your
wireless network. For added security, you should change the default SSID (
linksys
) to a unique name.
Wireless Channel
. Select the appropriate channel from the list provided to correspond with your network
settings. All devices in your wireless network must be broadcast on the same channel in order to function
correctly.
Wireless SSID Broadcast
. When wireless clients survey the local area for wireless networks to associate with,
they will detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting,
Enable
. If you do not want to broadcast the Router's SSID, then select
Disable
.
Change these settings as described here, and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 8-19: Wireless Tab - Basic Wireless Settings
