manualshive.com logo in svg

Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband, User Manual, Page: 37 / 145

Share
Download
Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband User Manual Download Page 37

27

Chapter 5: Setting up the Wireless-G Router for 3G/UMTS or GPRS Service
Using the Setup Wizard

Wireless-G Router for 3G/UMTS Broadband

19. The Setup Wizard will ask you to review your settings before it saves them. Click the 

Yes

 button if you are 

satisfied with your settings, or click the 

No

 button if you do not want to save your new settings.

20. The 

Congratulations

 screen will appear. Click the 

Online Registration 

button to register the Router, or click 

the 

Exit

 button to exit the Setup Wizard.

Congratulations! The installation of the Wireless-G Router for 3G/UMTS Broadband is complete.

If you want to make advanced configuration changes, proceed to “Chapter 8: Configuring the Wireless-G 

Router for 3G/UMTS Broadband.”

Figure 5-20: Confirm New Settings Screen

Figure 5-21: Congratulations Screen

Summary of Contents for WRT54G3G - Wireless-G Router For Verizon Wireless Broadband


















































































































































Reviews:

No comments