71
Chapter 5: Using the Web-based Utility for Configuration
Logs Tab - Global Parameters
WebView Switches
Logs Tab - Global Parameters
The
Global Parameters
screen lets you define which events are recorded by which logs. You can enable logs for
the Switch and define specific logs.
Logging
. If you want the Switch to keep logs, select
Enable
. Otherwise, select
Disable
.
Attribute
. Displayed here is Max RAM Log Entries (20-400). This stands for the maximum number of log entries
held in RAM. The minimum number is 20, and the maximum number is 400.
Current
. Displayed here is the current maximum number of log entries.
After Reset
. Enter the maximum number of log entries you want to allow. After you save this change, you will
need to reset the Switch so the change will take effect.
Severity
. This is a list of severity levels, in order of severity from highest (Emergency) to lowest (Debug).
Event Log
. Select the types of logs that you want to save to the Event Log.
Message Log
. Select the types of logs that you want to save to the Message Log.
Click the
Submit
button to save your changes.
Figure 5-67: Logs - Global Parameters