manualshive.com logo in svg

Linksys SRW2016, User Manual

Share
Download
Linksys SRW2016 User Manual Download Page 39

29

Chapter 5: Using the Web-based Utility for Configuration
Switch Conf. (Configuration) Tab - VLAN Interface Settings

WebView Switches

Switch Conf. (Configuration) Tab - VLAN Interface Settings

The VLAN Interface Settings screen lets you define properties of the interfaces that are associated with VLANs.

Interface

. This is the physical address of the interface, Port or LAG.

Interface VLAN Mode

. One of the following VLAN modes will appear

•

General - The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1q 
mode).

•

Access - The port belongs to a single, untagged VLAN. When a port is in Access mode, the packet tapes 
accepted on the port cannot be designated. Ingress filtering cannot be enabled/disabled on an access 
port.

•

Trunk - The port belongs to VLANs in which all ports are tagged (except for one port that can be 
untagged).

PVID

. VLAN ID of untagged packets.

Frame Type

. Packet type accepted on the port, Admit All (all packets are accepted) or VLAN Only (only VLAN 

packets are accepted).

Ingress Filtering

. Enables or disables Ingress filtering on the port. Ingress filtering discards packets that are 

destined to VLANs of which the specific port is not a member.

To edit the interface settings for a particular VLAN, click the 

Edit

 icon, which resembles a pencil, for that 

interface. On the screen that appears, you can settings for that interface. Click the 

Submit

 button when finished.

Figure 5-12: Switch Configuration - VLAN Interface Settings

Figure 5-13: Switch Configuration - edit VLAN Interface 

Settings

Summary of Contents for SRW2016




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands