39
Chapter 5: Using the Web-based Utility for Configuration
QoS Tab - Bandwidth
WebView Switches
QoS Tab - Bandwidth
Use the Bandwidth Settings page to define the bandwidth settings for specified ingress and egress interface.
Modifying queue scheduling affects the queue settings globally.
Port
. Shows the port to which bandwidth settings are applied.
Ingress Rate Limit
. Defines the ingress Rate Limit on the interface.
•
Status. Indicates if rate limiting is enabled on the interface.
•
Rate Limit. Configures the rate to which traffic is limited. The range is 70 - 285,000 kbps.
Egress Shaping Rates
. Determines the Committed Information Rate (CIR) and Committed Burst Size (CBS) on the
interface.
•
Status. Indicates if rate limiting is enabled on the interface.
•
Committed Information Rate (CIR). Defines the CIR rate. The possible field range is 4096-1,000,000,000.
•
Committed burst Size (CbS). Defines the CBS rate. The possible field range is 4096-16,000,000.
To modify the settings on this screen, click the
Edit
icon, which resembles a pencil, to open the edit screen.
Figure 5-29: QoS - Bandwidth
Figure 5-30: QoS - Edit Bandwidth
NOTE:
On FE Switches, the bandwidth rate cannot be
limited if storm control is enabled.
