manualshive.com logo in svg

Linksys SRW2016, User Manual

Share
Download
Linksys SRW2016 User Manual Download Page 63

53

Chapter 5: Using the Web-based Utility for Configuration
Security Tab for Other Switches - ACL Mapping

WebView Switches

Security Tab for Other Switches - ACL Mapping

When an ACL is mapped to an interface, the ACL is applied to the selected interface. Use the 

ACL Mapping

 

screen to assign ACL Lists to classification methods and interfaces. 

The ACL Mapping page contains the following fields: 

Interface

. The VLAN to which the ACL is mapped.  

ACL Name

. The name of the ACL bound to the VLAN.

To modify the settings on this screen, click the 

Edit

 icon, which resembles a pencil, to open the edit screen.

To delete a mapped ACL, click the 

Remove

 icon, which appears as a red 

X

. 

Figure 5-49: Fast Ethernet Security - ACL Mapping

NOTE:

This section does not apply to the SRW2048 

Switch. If you have a SRW2048 Switch, refer to the 
sections titled Security Tab for SRW2048 Switches.

Summary of Contents for SRW2016




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands