56
Chapter 5: Using the Web-based Utility for Configuration
SNTP Tab - Servers
WebView Switches
SNTP Tab - Servers
On the
Servers
screen, you can see a list of servers and their settings.
Unicast Server
. Displayed here is the IP address of the unicast server.
Poll Interval
. This is the interval (in seconds) at which the unicast server is polled for unicast information.
Encryption Key ID
. This is the encryption key used to authenticate the unicast server and Switch.
Preference
. This is the Switch’s preference for this particular unicast server.
Status
. Displayed here is the status of the unicast server.
Last Response
. This describes the last response of the unicast server.
Offset
. This is the difference between the Switch’s time zone and the server’s time zone.
Delay
. This shows how long it takes for data from the server to travel to the Switch.
Add icon
. To add an SNTP server, click the paper and pencil icon. Configure its settings on the screen that
appears, as described below.
Anycast Server
. Displayed here is the IP address of the anycast server.
Interface
. This is the interface that the anycast server uses.
Preference
. This is the Switch’s preference for this particular anycast server.
Status
. Displayed here is the status of the anycast server.
Last Response
. This describes the last response of the anycast server.
Offset
. This is the difference between the Switch’s time zone and the server’s time zone.
Delay
. This shows how long it takes for data from the server to travel to the Switch.
Broadcast Server
. Displayed here is the IP address of the broadcast server.
Interface
. This is the interface that the broadcast server uses.
Preference
. This is the Switch’s preference for this particular broadcast server.
Figure 5-52: SNTP - Servers