manualshive.com logo in svg

Linksys Linksys SPA9000, Administration Manual

Share
Download
Linksys Linksys SPA9000 Administration Manual Download Page 35

Linksys Voice System Administration Guide

33

Viewing Information about the SPA9000

Basic Administration of the SPA9000

Viewing Information about the SPA9000

The 

Router Status

 page provides information about software version, hardware version, MAC 

address, WAN connection type, IP address, and the packets that have been sent and received.

SPA9000 Router > Status

Viewing Information about Client Stations

The 

PBX Status

 page provides information about the client stations (IP phones), with hyperlinks 

to station configuration pages.

1. Connect to the SPA9000 administration web server, and choose Admin access with 

Advanced settings. (See 

”Connecting to the SPA9000 Administration Web Server,” on 

page 24

).

2. To view the status information for the client stations, click the 

PBX Status

 link in the top 

right corner or lower left corner of the page. The list of client stations appears.

SPA9000 > PBX Status

3. To view the

 Telephone Configuration

 page for any station, click the hyperlink in the 

IP Address

 

column. For information about the telephone configurations, see the 

Linksys Phone 

Administration Guide

.

Using the Interactive Voice Response Unit

In addition to the administration web server, the SPA9000 is equipped with an Interactive Voice 
Response unit (IVR) that allows you to perform certain administrative tasks by using an analog 
phone that is connected to the SPA9000.

Summary of Contents for Linksys SPA9000























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands