Linksys Voice System Administration Guide
191
Voice tab
Voice tab > FXS 1/2 page
Subscriber Information section
Voice tab > FXS 1/2 page
Dial Plan section
Voice tab > FXS 1/2 page
Mailbox Status section
Restrict Source IP
If line interfaces use the same SIP Port value and the Restrict Source IP
feature is enabled, the proxy IP address for Lines 1 and 2 is treated as an
acceptable IP address for both lines. To enable the Restrict Source IP
feature, select yes. Otherwise, select no.
A source IP address is untrusted if it does not match any of the IP
addresses resolved from the configured Proxy or Outbound Proxy if Use
Outbound Proxy is set to yes.
Default:
no
Referor Bye Delay
Controls when the SPA9000 sends BYE to terminate stale call legs after
completion of call transfers. Multiple delay settings (Referor, Refer
Target, Referee, and Refer-To Target) are configured on this screen. For
the Referor Bye Delay, enter the appropriate period of time in seconds.
Default:
4
Refer Target Bye Delay
For the Refer Target Bye Delay, enter the appropriate period of time in
seconds.
Default:
0
Referee Bye Delay
For the Referee Bye Delay, enter the appropriate period of time in
seconds.
Default:
0
Refer-To Target Contact
To contact the refer-to target, select yes. Otherwise, select no.
Default:
no
Sticky 183
If this feature is enabled, the IP telephony ignores further 180 SIP
responses after receiving the first 183 SIP response for an outbound
INVITE. To enable this feature, select yes. Otherwise, select no.
Default:
no
Display Name
Display name for caller ID.
User ID
Extension number for this line.
Dial Plan
Dial plan script for this line.
Message Waiting
Indicates whether you have new voicemail waiting.
Summary of Contents for Linksys SPA9000
Page 245: ...Linksys Voice System Administration Guide 243 ...
Page 246: ...080322NC LB ...
