54
Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter
Windows 98 or Me Instructions
EtherFast Cable/DSL Router with 4-Port Switch
Appendix C: Finding the MAC Address and IP Address for
Your Ethernet Adapter
This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC
filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s
Ethernet adapter. This IP address is used for the Router’s filtering, forwarding, and/or DMZ features. Follow the
steps in this appendix to find the adapter’s MAC or IP address in Windows 98, Me, 2000, or XP.
Windows 98 or Me Instructions
1. Click
Start
and
Run
. In the
Open
field, enter
winipcfg
. Then press the
Enter
key or the
OK
button.
2. When the
IP Configuration
screen appears, select the Ethernet adapter you have connected to the Router via a
CAT 5 Ethernet network cable.
3. Write down the Adapter Address as shown on your computer screen. This is the MAC address for your
Ethernet adapter and is shown as a series of numbers and letters.
The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.
The example shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show something
different.
Windows 2000 or XP Instructions
1. Click
Start
and
Run
. In the
Open
field, enter
cmd
. Press the
Enter
key or click the
OK
button.
2. At the command prompt, enter
ipconfig /all
. Then press the
Enter
key.
Figure C-2: MAC Address/Adapter
Address
Figure C-1: IP Configuration Screen
Note:
The MAC address is also called the Adapter Address.
Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router
Page 73: ...67 Appendix H Regulatory Information and Safety EtherFast Cable DSL Router with 4 Port Switch ...
Page 74: ...68 Appendix H Regulatory Information and Safety EtherFast Cable DSL Router with 4 Port Switch ...
Page 75: ...69 Appendix H Regulatory Information and Safety EtherFast Cable DSL Router with 4 Port Switch ...
