Linksys BEFSR41 - EtherFast Cable/DSL Router User Manual Download Page 23 | Manualshive

Page: 23 / 78

background image

17

Chapter 5: Configuring the Router
The Setup Tab - Basic Setup

EtherFast Cable/DSL Router with 4-Port Switch

Router IP

The values for the Router’s Local IP Address and Subnet Mask are shown here. In most cases, keeping the default
values will work.

Local IP Address

. The default value is

192.168.1.1

.

Subnet Mask

. The default value is

255.255.255.0

.

Network Address Server Settings (DHCP)

These settings allow you to configure the Router’s Dynamic Host Configuration Protocol (DHCP) server function. A
DHCP server automatically assigns an IP address to each computer on your network. Unless you already have
one, it is highly recommended that you leave the Router enabled as a DHCP server.

Local DHCP Server

. DHCP is enabled by factory default. If you already have a DHCP server on your network, set

the Router’s DHCP option to

Disable

. If you disable DHCP, remember to assign a static IP address to the Router.

Start IP Address

. Enter a value for the DHCP server to start with when issuing IP addresses. Because the default

IP address for the Router is 192.168.1.1, the Start IP Address must be 192.168.1. 2 or greater, but smaller than
192.168.1.254. The default Start IP Address is

192.168.1.100

.

Number of Addresses

(Optional). Enter the maximum number of PCs that you want the DHCP server to assign IP

addresses to. This number cannot be greater than 253. The default is

50

.

DHCP Address Range

. The range of dynamic IP addresses is displayed here.

Client Lease Time

. The Client Lease Time is the amount of time a network user will be allowed connection to the

Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased”
this dynamic IP address. After the dynamic IP address has expired, the user will be automatically assigned a new
dynamic IP address. The default is

0

minutes, which means one day.

Static DNS 1-3

. The Domain Name System (DNS) is how the Internet translates domain or website names into

Internet addresses or URLs. Your ISP will provide you with at least one DNS Server IP Address. You can enter up to
two DNS Server IP Addresses here. The Router will use these for quicker access to functioning DNS servers.

WINS

. The Windows Internet Naming Service (WINS) converts NetBIOS names to IP addresses. If you use a WINS

server, enter that server’s IP address here. Otherwise, leave this field blank.

When you have finished making changes to this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. Help information is shown on the right-hand side of the

screen. For additional help, click

More

.

dynamic ip address

: a temporary IP

address assigned by a DHCP server

Note:

To test your settings, connect to the

Internet now.

«
...
21
22
23
24
25
...
»

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router















































































Reviews:

No comments

Related manuals for BEFSR41 - EtherFast Cable/DSL Router

Brand: National Instruments Pages: 36

ThunderLAN TNETE100A

Brand: Texas Instruments Pages: 179

Brand: IBM Pages: 32

JetWeb JX2-PR0FI1

Brand: Jetter Pages: 67

Protege PRT-PX16-PCB

Brand: ICT Pages: 34

ADSL 2/2+ VPN Firewall Router ADE-4300A/B

Brand: Planet Pages: 132

Brand: B&B Electronics Pages: 2

Brand: CyberTAN Pages: 67

Brand: 1&1 Pages: 32

WNFB-265AXI(BT)

Brand: Sparklan Pages: 14

Brand: FiberHome Pages: 44

Brand: Toto Link Pages: 57

OmniTik UPA-5HnD

Brand: RouterBOARD Pages: 4

Brand: ZyXEL Communications Pages: 4

Brand: Asus Pages: 30

Brand: Asus Pages: 4

Brand: Asus Pages: 60

ROG Rapture GT-AC5300

Brand: Asus Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands