Linksys BEFSR41 - EtherFast Cable/DSL Router User Manual Download Page 42

Page: 42 / 78

Chapter 5: Configuring the Router
The Administration Tab - Firmware Upgrade

EtherFast Cable/DSL Router with 4-Port Switch

The Administration Tab - Firmware Upgrade

The

Firmware Upgrade

screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless

you are experiencing problems with the Router or the new firmware has a feature you want to use.

Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website,

www.linksys.com/international

. Then extract the file.

Upgrade Firmware

Please select a file to upgrade

. In the field provided, enter the name of the extracted firmware upgrade file, or

click the

Browse

button to find this file.

Upgrade

. After you have selected the appropriate file, click the

Upgrade

button, and follow the on-screen

instructions.

Help information is shown on the right-hand side of the screen. For additional help, click

More

Note:

The Router may lose all of the settings you have customized. Before you upgrade its firmware,

write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all
of your configuration settings.

download

: to receive a file transmitted over a network

firmware

: the programming code

that runs a networking device

upgrade

: to replace existing software or

firmware with a newer version

Figure 5-29: Administration Tab - Firmware Upgrade

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router















































































Search results

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router

Reviews:

Related manuals for BEFSR41 - EtherFast Cable/DSL Router

Brands by name

Popular brands

Linksys BEFSR41 - EtherFast Cable/DSL Router, User Manual

Search results

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router

Reviews:

Related manuals for BEFSR41 - EtherFast Cable/DSL Router

Brands by name

Popular brands