Linksys BEFSR41 - EtherFast Cable/DSL Router User Manual Download Page 21 | Manualshive

Page: 21 / 78

background image

15

Chapter 5: Configuring the Router
The Setup Tab - Basic Setup

EtherFast Cable/DSL Router with 4-Port Switch

connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand,
click the radio button. If you want your Internet connection to remain on at all times, enter

0

in the

Max Idle

Time

field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access

disconnects.

Keep Alive and Redial Period

. This option keeps your Internet access connected indefinitely, even when it

sits idle. If you select this option, the Router will periodically check your Internet connection. If the connection
is down, then the Router will automatically re-establish the connection. To use this option, click the radio
button next to

Keep Alive

. The default Redial Period is 30 seconds.

When you are finished, click the

Save Settings

button. Then click the

Status

tab, and click the

Connect

button to start the connection.

Heart Beat Signal

Heart Beat Signal is a service used in Australia only. If you are using a Heart Beat Signal connection, check
with your ISP for the necessary setup information.

User Name and Password

. Enter the User Name and Password provided by your ISP.

Heart Beat Server

. Enter the IP address of your ISP’s Heart Beat server. This is provided by your ISP.

Connect on Demand and Max Idle Time

. You can configure the Router to cut the Internet connection after it

has been inactive for a specific period of time (Max Idle Time). If your Internet connection has been
terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your
connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand,
click the radio button. If you want your Internet connection to remain on at all times, enter

0

in the

Max Idle

Time

field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access

disconnects.

Keep Alive and Redial Period

. This option keeps your Internet access connected indefinitely, even when it

sits idle. If you select this option, the Router will periodically check your Internet connection. If the connection
is down, then the Router will automatically re-establish the connection. To use this option, click the radio
button next to

Keep Alive

. The default Redial Period is 30 seconds.

When you are finished, click the

Save Settings

button. Then click the

Status

tab, and click the

Connect

button to start the connection.

Figure 5-8: Heart Beat Signal

«
...
19
20
21
22
23
...
»

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router















































































Reviews:

No comments

Related manuals for BEFSR41 - EtherFast Cable/DSL Router

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: National Instruments Pages: 16

Brand: National Instruments Pages: 23

InterReach Fusion ADCP-77-044

Brand: TE Connectivity Pages: 236

INTERNET PRIVACY PROTECTION

Brand: AlphaShield Pages: 49

Brand: Winext Pages: 37

Brand: TP-Link Pages: 176

Brand: Caen Pages: 14

Brand: Zoom Pages: 31

Secure Site Manager 16

Brand: Black Box Pages: 16

Brand: Aerotech Pages: 62

Brand: Rajant Pages: 93

Brand: Patton electronics Pages: 40

TeleLite 720920 Series

Brand: Positron Pages: 21

Brand: H3C Pages: 46

Brand: National Datacomm Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands