background image

28

Chapter 5: Configuring the Router
The Applications & Gaming Tab - UPnP Forwarding

EtherFast Cable/DSL Router with 4-Port Switch

NNTP

 (Network News Transfer Protocol). The protocol used to connect to Usenet groups on the Internet. Usenet 

newsreaders support the NNTP protocol.

SNMP

 (Simple Network Management Protocol). A widely used network monitoring and control protocol. Data is 

passed from SNMP agents, which are hardware and/or software processes reporting activity in each network 
device (hub, router, bridge, etc.) to the workstation console used to oversee the network. The agents return 
information contained in a MIB (Management Information Base), which is a data structure that defines what is 
obtainable from the device and what can be controlled (turned off, on, etc.).

Ext. Port

. Enter the number of the external port used by the server in the 

Ext. Port

 column. Check with the 

Internet application documentation for more information.

TCP or UDP

. Select the protocol 

UDP

 or 

TCP

 for each application. You cannot select both protocols.

Int. Port

. Enter the number of the internal port used by the server in the 

Int. Port

 column. Check with the Internet 

application software documentation for more information.

IP Address

. Enter the IP address of the server that you want the Internet users to be able to access. To find the IP 

address, go to “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter.”

Enabled

. Check the 

Enabled

 box to enable the service you have defined. UPnP Forwarding will not function if the 

Enabled button is left unchecked. This is disabled (unchecked) by default.

When you have finished making changes to this screen, click the 

Save Settings

 button to save the changes, or 

click the 

Cancel Changes

 button to undo your changes. Help information is shown on the right-hand side of the 

screen. For additional help, click 

More

.

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router















































































Reviews: