Linksys BEFSR41 - EtherFast Cable/DSL Router User Manual Download Page 43

Page: 43 / 78

Chapter 5: Configuring the Router
The Status Tab - Router

EtherFast Cable/DSL Router with 4-Port Switch

The Status Tab - Router

The

Router

screen displays information about the Router and its current settings. The on-screen information will

vary depending on the Internet Connection Type selected on the

Setup

screen.

Information

Firmware Version

. This shows the installed version and date of the firmware.

MAC Address

. The MAC Address of the Router’s Internet interface is displayed here.

Status

Login Type

. This indicates the type of Internet connection you are using.

Login Status

. For these dial-up style connections, PPPoE, RAS, PPTP, HBS, and L2TP, the status of the connection

is displayed, and there is a Connect button to click if there is no connection and you want to establish an Internet
connection.

Internet IP Address

. The Router’s Internet IP Address is displayed here.

Subnet Mask and Default Gateway

. The Router’s Subnet Mask and Default Gateway address are displayed here

for DHCP and static IP connections.

Static DNS1-3

. Shown here are the DNS (Domain Name System) IP addresses currently used by the Router.

MTU

. The current MTU settings are displayed here.

DHCP Release

. Available for a DHCP connection, click the

DHCP Release

button to release the current IP address

of the device connected to the Router’s Internet port.

DHCP Renew

. Available for a DHCP connection, click the

DHCP Renew

button to replace the current IP

address—of the device connected to the Router’s Internet port—with a new IP address.

Click the

Refresh

button to update the on-screen information. Help information is shown on the right-hand side

of the screen. For additional help, click

More

Figure 5-30: Status Tab - Router

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router















































































Search results

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router

Reviews:

Related manuals for BEFSR41 - EtherFast Cable/DSL Router

Brands by name

Popular brands

Linksys BEFSR41 - EtherFast Cable/DSL Router, User Manual

Search results

Summary of Contents for BEFSR41 - EtherFast Cable/DSL Router

Reviews:

Related manuals for BEFSR41 - EtherFast Cable/DSL Router

Brands by name

Popular brands