Linkcom IP 340P, User Manual

Page: 49 / 82

49/81
Dial Peer Examples
Web Interface Explanation Example
Set phone number,
Destination, Alias and Delete
Length.
Phone number is XXXT;
Destination is
255.255.255.255 (0.0.0.2) and
Alias is del.
Any phone number that
begins with XXX will be sent
via SIP2 after the first several
digits are deleted depending
on the delete length.
Dial “93333”
The SIP2 server will
receive “3333”
This creates a speed dial
function. Dialing “2”, will
cause the entire alias number
to be sent out.
Dial “2”
The SIP1 server will
receive 33334444
The phone will add the alias to
the end of the dialed number
if the dialed number matches
the template in the Phone
Number box.
Dial “8309“
The SIP1 server will
receive “07558309”
enter the destination IP address or domain name. To use a dial rule
on the SIP2 line, enter 0.0.0.2.
Port Set the Signaling port, the default is 5060.
Alias Set the Alias. This is the text to be added, replaced, or deleted. It is
optional.
Note: There are four types of aliases.
1) Add: xxx – xxx will be dialed before any phone number.
2) All: xxx – xxx will replace the phone number.
3) Del: The characters will be deleted from the phone number.
4) Rep: xxx – xxx will be substituted for the specified characters.
Call Mode Select either SIP or IAX2 protocol.
Suffix Characters to be added at the end of the phone number. This is
optional.
Delete Length Sets the number of characters to be deleted. For example, if this is
set to 3, the phone will delete the first 3 digits of the phone
number. This is optional.