Linkcom IP 340P, User Manual

Page: 24 / 82

24/81
2. Outbound Proxy ‐ SIP Outbound Proxy IP Address
3. Registration – Enable or disable registration for this account.
4. Server Address – SIP Server IP Address
5. Server Port – SIP Port – Default 5060
6. SIP User – SIP User name
7. Auth User – User name for authentication
8. Auth Password – Password for authentication
7.1.2 Advanced Settings
1. Domain Realm – SIP Domain
2. Dial Without Registered – Enable or disable dialing with no SIP registration
3. Anonymous – Privacy Support. Choose RFC3323, RFC3325 or None
4. DTMF Mode – Choose RFC2833, SIP_Info, In ‐ band, or Auto
5. Use STUN – Enable or disable use of STUN Server. If enabled, the IP address of the
STUN server must be entered.
6. Local Port – Local SIP Port – Default 5060
7. Ring Type – Select ring type for this account. See Section 6.3.2.
8. MWI Number – Number for Message Waiting
9. Pickup Number – Code for call pickup
10. Park Number – Code for call park
11. Join Call Number – Code to join a call
12. Missed Call Logs – Enable or disable
7.1.3 Service Code
Sets the codes to be dialed to an IP PBX to enable or disable the following functions.
1. Mode – Selects whether or not all these codes are active.
2. DND
3. Always CFW – Always Call Forward
4. Busy CFW ‐ Call Forward Busy
5. No Answer CFW ‐ Call Forward No Answer
6. Anonymous
7.2 Network
Enter Network settings as discussed in Section 2.2.
7.3 Security
1. Menu Password – Password to enter configuration menu.
2. Keyboard Password – If this feature is enabled, this password must be entered whenever
the keypad is used.
3. Keyboard Status – Enable or disable key lock as described above.