Linkcom IP 340P, User Manual

Page: 53 / 82

53/81
Turn Off Power Light Disables Power Light if selected.
Emergency Call
Number
The phone will dial the emergency call number even if the keyboard
is locked. And multi numbers can be added by “,”, such as 911,999
Enable Password Dial When a number is entered beginning with the password prefix, the
following N numbers after the password prefix will be displayed as
*. N is the value entered in the Password Length field.
For example: If the password prefix is 3 and the Password Length is
2, then dialing the number 34567 will display 3**67 on the phone.
Password Dial Prefix Prefix for password dialing as described above.
Password Dial Length Length for password dialing as described above.
Enable Call History Allow phone to save missed call/dialed call/incoming call or not.
Enable Default Line If enabled, you can assigned default SIP line for dialing out, not
SIP1.
Alllow IP Call Allow IP direct call, or disable IP call for dialing.
Play Talking DTMF
Tone
Allow DTMF voice played during talking, or only send DTMF without
local play.
Ban Outgoing If enabled, no outgoing calls can be made.
Enable Call Waiting If enabled, notifies user of a second call during a call. Caller ID of
the new caller will be displayed. Press HOLD button to place
existing call on hold and answer new call. Press HOLD again to
return to first call.
Enable 3 ‐ way
Conference
If enabled, allows 3 ‐ way conference.
Accept Any Call If enabled, the phone will accept a call even if the called number
does not belong to the phone.
Enable Call Completion This is similar to Auto Redial except that the phone detects the state
of the called number before making a new call attempt.
Enable Pre ‐ Dial If this feature is enabled, digits dialed on ‐ hook will be transmitted
when the phone goes off ‐ hook.
Enable Silent Mode If enabled, the phone will not ring to indicate a new call. Instead,
the light below the key pad will blink to indicate a new call.
Hide DTMF This feature sets how DTMF digits are displayed after a call is in
progress. For example, dialing a PIN code to access banking
information. There are 4 choices.
13. Disabled – All the digits will be shown on the LCD.
14. All – None of the digits will be shown on the LCD. The “*” will
be shown.
15. Delay – The last digit entered will be shown for a short time and
then replaced by “*.”
16. Last Show – The last digit entered will be shown. Previous
digits are replaced by “*.”
Enable Intercom Mute If enabled, mutes incoming calls during an intercom call
Enable Intercom Barge If enabled, the phone will auto ‐ answer an intercom call during an