Linkcom IP 340P, User Manual

Page: 13 / 82

13/81
18. Press Save softkey.
19. Press Back softkey.
20. Press up/down key to scroll to “1 Connection Mode.”
21. Press Enter.
22. Use vol ‐ /vol+ to select “DHCP.”
23. Press Save softkey.
24. Press Back or Exit 6 times to return to idle screen.
25. Disconnect and reconnect the power supply so the phone will reboot and apply the new
settings.
3 Basic Functions
3.1 Making a call
3.1.1 Call Device
Calls can be made using two different devices:
1. Handset ‐ Pick up the handset. The icon will be shown on the LCD screen.
34. Speakerphone ‐ Press the Speaker button. The icon will be shown on the LCD
screen.
The number may also be dialed first. Then the method of speaking can be chosen.
3.1.2 Call Methods
Use one of the following methods to place a call.
1. Dial the desired number using the keypad.
2. Press the REDIAL button to redial the last number called.
3. Press the Dial softkey to make the call if necessary.
3.2 Answering a call
If the phone is idle, lift the handset, press the Speaker button or Answer softkey to answer
Using the speaker phone to answer.
If the phone is in use, press the Answer softkey.
During the conversation, you can alternate between Handset and Speaker phone by pressing
the corresponding buttons or picking up the handset.
3.3 Do Not Disturb (DND)
Press the DND softkey then use vol ‐ /vol+ to select Phone,Line,Disabled to active or disabled
DND Mode.
If you select Phone ,New incoming calls will be rejected and the display will show: icon.
If you select Line,you should press Down key then select Line1 or Line2 to Enable ,after new
incoming calls will be rejected and the display will show: icon.