iGrow 1800 Installation Guide
Page46
Link4 (714) 524-0004
Programming your iGrow 1800
Before You Begin Programming
Before the iGrow 1800™ is programmed, it is recommended that the following steps are followed:
Hardware is properly installed and tested with manual switches.
All toggle switches have been restored back to the OFF state.
All the templates from Chapter 3: Control Strategies that are relevant to your application are understood and are
completely filled out.
Navigation
The iGrow 1800™ has a 7 button keypad. The behaviors of the keys are:
-
Used to edit (decrement) alphanumeric parameters. See also Browse Mode.
+
Used to edit (increment) alphanumeric parameters. See also Browse Mode.
Prev
Used to move backward from screen to screen in browser mode or to the previous entry in the “edit”
mode.
Next
Used to move forward from screen to screen in browser mode or to the next entry in the “edit” mode.
Back
Used to move back up one menu level and save any changes that have been made.
Help
Pressing Help will give you hints for whatever page you happen to be on.
Enter/
Pressing this key initially goes to the menu screen and after that it is used to enter.
MENU
subsequent highlighted screens. See also Browse Mode.
Note:
When browsing through the menu,
highlighted
text signifies that it can be modified.
