iGrow 1800 Installation Guide
Page9
Link4 (714) 524-0004
T1
T2
T3
T4
T5
T6
Su
M
T
W
Th
F
Sa
Su
M
T
W
Th
F
Sa
1
2
3
4
5
6
7
8
9
10
11
12
EQUIPMENT
NAME
ON TIME
(hh:mm:ss)
OUTPUTS
SCHEDULED MODE
START TIME
(hh:mm)
SCHEDULED IRRIGATION DAYS
For more information on Schedule mode irrigation, see the
Irrigation
portion of this manual.
Figure 3.5 Schedule Mode Worksheet for Irrigation
Installation
Content Inspection
It’s always a good idea to check to make sure your iGrow1800 came with all items listed below.
Additional accessories such as outside temperature sensor, light sensor, wind and rain sensors, and CO2
monitors can be purchased and added at any time.
Make sure you have all items, all associated hardware, and necessary tools before you begin installation.
If there is any visible damage or missing parts, please contact our customer service at
[email protected] or 1-866-755-LINK or fax us at 714.854-7244.
1.
iGrow 1800
unit
2.
12 VDC external Power Supply
3.
Temp/Humidity Sensor with 50ft. cable
4.
4 pcs – 3/8” Drive, Hex Head Self Drilling Screws
5.
8 pcs – 1/4” Washers
6.
4 pcs – 1/4 -20 x 1” Hex Bolts
7.
4 pcs – 1/4 –20 Hex Nut
8.
1pc – small screwdriver (for tightening wire terminals).
Recommended Tools
1.
Drill
2.
3/8” socket drive drill bit with 3” extender
3.
Adjustable Wrench
4.
1/8” high speed steel drill bit
5.
7/16” socket drive with 3” extender
6.
Level (optional)
