iGrow 1800 Advanced Aux Controls
Page
114
of
131
Link4 (714) 524-0004
Part of the requirement was a requirement that the condition (Inside Temp > 87.5F) must be met for at
least 2 minutes continuously. This is referred to as the
Condition Hold Time
. Enter in 2m as shown
below.
Once the condition has been met, in this case Inside Temp > 87.5F for 2 minutes, then an action will take
place. The action is usually setting something. This is the default already (
set
). Leave the default and
proceed to the target equipment. Click on the
Variable 1
button.
As with the operands, the Target Equipment are grouped by functions. In this case, select Equipment
and select Curt. This will set the Curtain as the target of this statement.
