59/65
D9U003VB3-0101_04
12.1.1 Routine Cleaning and Disinfection
Cleaning the mattress:
Select Static mode in order to completely inflate all mattress cells (see Max Mode).
Remove air connector and select Transport mode (see Transport Mode).
Check mattress cover top for any signs of damage.
Replace or repair and completely disinfect mattress cover top if damaged.
Check inside of mattress cover top for signs of liquid ingress.
Replace or clean and completely disinfect mattress cover top if damp inside.
Leave mattress cover on mattress.
Clean with 60 °C warm water and cleaning detergent.
Rinse mattress with cold water.
Allow mattress to dry or wipe it dry.
Wipe mattress with disinfectant.
Wipe mattress with cold water.
Allow mattress to dry or wipe it dry.
Cleaning the SCU:
Before cleaning of SCU, cover the air connector in order to prevent anything from penetrating into the air
connector during cleaning.
Wipe SCU with disinfectant. Wipe SCU with cold water. It is recommended to use the cleaning wipes.
Allow SCU to dry or wipe it dry.
12.1.2 Full Cleaning and Disinfection
Cleaning the mattress:
Deflate mattress and remove cover (see Removing the Mattress Cover).
Check mattress cover top and base for any signs of damage.
Replace or repair and completely disinfect mattress cover top and base if damaged.
Check mattress cover top and base for signs of liquid ingress.
Replace or clean and completely disinfect mattress cover top and base if damp inside.
Clean all mattress cells and pipes with 60 °C warm water and cleaning detergent.
Rinse mattress with cold water.
Allow mattress to dry or wipe it dry.
Wipe mattress with disinfectant.
Wipe mattress with cold water.
Allow mattress to dry or wipe it dry.
Cleaning the mattress and cushion cover:
Remove cover (see Removing the Mattress Cover).
Wash cover in washing machine for 3 min at 71 °C.
Tumble dry cover at low temperature.
Cleaning the air pipe:
Wipe air pipe with cleaning agent or disinfectant.
Rinse air pipe with cold water.
Allow air pipe to dry.
Cleaning the SCU:
Remove filter.
Before cleaning of SCU, cover the air connector in order to prevent anything from penetrating into the air
connector during cleaning.
Wipe SCU and filter with disinfectant. Wipe SCU with cold water. It is recommended to use the cleaning
wipes.
Allow SCU and filter to dry.
Reinsert filter.
12.1.3 Removing the Mattress Cover
Carefully open zipper under side skirt of mattress cover on foot end of mattress.
Remove top part of mattress cover.
Open clips in bottom part of mattress cover to remove mattress cells.
Remove umbilical cover.
Remove bottom part of mattress cover.
