LINET Virtuoso 3 Series Instructions For Use And Technical Description Download Page 13

Page: 13 / 65

13/65

D9U003VB3-0101_04

Safety Instructions

WARNING!

Any serious incident that has occurred in relation to the device should be reported to the manufactu

rer and the competent authority of the Member State in which the user and/or patient is established!

WARNING!

Only authorised and trained person using the tool is allowed to change fuses and power supplies!

WARNING!

This medical device is not intended for oxygen enriched environment!

WARNING!

This medical device is not intended for use with flammable substances!

WARNING!

This medical device is not portable medical electrical equipment!

WARNING!

Patient is allowed to use selected control elements only if hospital personnel had assessed that the

patient´s physical and psychological state is in accordance with use of them and only if the hospital

personnel had trained the patient in accordance with the instructions for use!

WARNING!

The patient should be under regular supervision of hospital staff during treatment of skin injuries!

Summary of Contents for Virtuoso 3 Series


































































Search results

Summary of Contents for Virtuoso 3 Series

Reviews:

Related manuals for Virtuoso 3 Series

Brands by name

Popular brands

LINET Virtuoso 3 Series, Instructions For Use And Technical Description

Search results

Summary of Contents for Virtuoso 3 Series

Reviews:

Related manuals for Virtuoso 3 Series

Brands by name

Popular brands